“Absolutely the easiest system I’ve ever used. A fantastic well-developed product. ”
– Jeffrey W., Snap ‘n Lock™ Customer
UPGRADING YOUR FENCE IS A SNAP!
Snap ‘n Lock® Fence Toppers™ are now available for fences! Whether it’s a new or old fence, you can give your property the look of elegance in a snap.
One ten-pack gives you enough balusters and connectors to fill out a 6′ section of fence. Durable T6063 aluminum balusters are powder-coated for exceptional longevity and beauty. The connectors are made with 100% USA polycarbonate, handle extreme temperatures and UV rays.
Fence Toppers™ are 10″ long and fit a 10-½” opening height which compliments a typical 5′ panel with a 1′ topper privacy style fence.
It’s so simple that even folks who are just starting out can do it themselves with minimal carpentry experience.
| Color Options | Black and White |
| Width Options | 3/4″ Only |
| Length Options | 10″ lengths |
| Pack Quantity | 10 balusters and 20 Snap’n Lock Connectors and screws |
| Material | Powder coated, T6063 aluminum, poly carbonate connectors |
| Included Accessories | Revolutionary sideways installed Snap’n Lock Connectors included. |
| How many do I need? | One baluster every 6-3/4″ on center. One ten pack can cover approximately 6′ of fence. |
| Warranty | Limited Lifetime |
Screw the base into the 2×4.
Snap in the baluster.
Slide down and lock the collar.
Save time and effort by using our Snap’n Lock Fence Topper Kits for your next fence.
Whether you’re giving new life to an old fence or building a brand new fence, Fence Toppers will be a delight to work. They will give your fence a splash of stately elegance. But you will also enjoy working with them and be able to say you did it all on your own.
Do not let the simple look of the Snap ‘n Lock™ Balusters fool you. A lot of thought went into conceiving this design in order to make it work so well. The base and the collar are designed to incredibly tight tolerances so they fit together like a glove and constrict around the baluster to hold it tight eliminating any wobble.
The sidewalls of the base are free to flex and accept the baluster as it is pushed in place. The mating surfaces of the base and the collar are sloped so that as they slide together the fit gets tighter and tighter until they lock together once fully seated.
The parts can be released by fitting a slot screwdriver under the color and popping it up. This allows for easy maintenance or the addition of decorative baluster collars anytime after installation.
Replace old lattice panels with Fence Topper balusters for a clean fresh new look and give your fence a new lease on life.
Sideways installation makes this possible!
With traditional plug systems, you have to take down the entire railing and rebuild from scratch.
Installing Fence Toppers with a new fence is very similar to using the Snap’n Lock balusters for a new deck railing.
When updating an old fence you may be able to remove the existing panel and install the Fence Toppers without removing the top rail. In other cases, you may have to remove the top rail and re-install it to create a 10-½” gap for the connectors and Fence Toppers to snap in.
The collar releases using a slot screwdriver.
Stain or paint around the base quickly and easily. No need to use tape.
Just slide and lock the collar down when you are done
Download a full-size copy of the Warranty.
USA: We are a vendor to these dealers. Call these dealers to confirm availability.
Canada: We are a vendor to these dealers. Call these dealers to confirm availability.
Our mission has always been to deliver solutions that look great and perform to higher standards. So we try hard to remove redundant materials, to hide fasteners, and to deliver it all in a form that looks beautiful and stands out from the crowd. It is just one more way we are trying hard to help you succeed.