“I just wanted to thank you for your wonderful Deck Devil product. I ordered it and it proved to be just the right tool for the job. Thanks for making a product that works!”
Doug Johnson – Elbert, CO
The most versatile board straightener you will find.
This telescopic compact device attaches to any hand held cordless drill (3/8″ chuck) to deliver precise push or pull power to straighten any type of board. Your third hand on the job site.
This means you can get into tighter spaces to do what you need to do like:
| Model | DKDVL |
| Color/Coating | Bright Red powder coat on hot dip zinc |
| Dimensions | Size: 1″ x 1″ x 14″ |
| Hex Drive | 9.5mm hex |
| Chuck Size | 3/8″ or larger |
| Weight | 4 lbs |
| Recommended Uses | Use for tightening posts to Compression Post Base or Structural Post Anchor. |
| Model | DKDVL-EXT |
| Color/Coating | Electro galvanized finish |
| Material | Steel |
| Dimensions | Size: 1″ x 1″ x 13” |
| Model | DKDVL-JA/DKDVL-JA2 |
| Color/Coating | Electro galvanized finish |
| Material | Steel |
| Dimensions | 1.75″ opening for US/Canada nominal 2″ lumber |
| Weight | 0.70 lbs |
This telescopic compact device attaches to any handheld cordless drill (3/8″ chuck) and delivers precise push or pull power to straighten any type of board. It’s your third hand on the job site! This means you can get into tighter spaces to:
+ Straighten any board
+ Compress bowed joists down onto supporting beams
+ Pull fascia boards around curves
Download a full-size copy of the Warranty.
What an awesome tool! I added a reversible ratcheting wrench, secured with a plastic cap, after dropping a socket 20′ into a Pakasandra bed. We were re-decking and there was no room to use a drill, as instructions suggest. I had a wrench in my tool box that is now dedicated to the Deck Devil. I was thinking that you may want to offer it to other purchasers, as they are not a commonly available size. Mine is SnapOn or Mac, no I didn’t look- it fit.
Skiteach
I used it on composite 5/4 and it worked great. Then I tried it with some 2x4s, not even a challenge. I also tried it on 2x6s, and it worked great. I didn’t have a board I couldn’t straighten, not one! I even put a tremendously bowed 2×6 up there and it straightened it perfect. I made a little extension and tried it with some 2x12s and it still worked great. The only thing I might change is to add a spinner handle to it. I will recommend this tool to all my friends and anybody who will listen. Thank you!
Gary P.
Mr. X
Walter H.
This tool is a MUST have for anyone building a deck. 1st ever DIY project and the deck looks like a pro built it. I blame this tool for the excellent results. Worth every penny.
Allan S.
Michael F.
USA: We are a vendor to these dealers. Call these dealers to confirm availability.
Canada: We are a vendor to these dealers. Call these dealers to confirm availability.
Our mission has always been to deliver solutions that look great and perform to higher standards. So we try hard to remove redundant materials, to hide fasteners, and to deliver it all in a form that looks beautiful and stands out from the crowd. It is just one more way we are trying hard to help you succeed.